Water Meter Distributors in Delhi

Product Details:

• Due to the volumetric rotary piston measurement principle, the V100 range can achieve the highest levels of reading accuracy even at the lowest flow rate. The meter can be installed in any position: horizontally, vertically or inclined pipelines, maintaining optimum performance with no loss of accuracy.

• The use of advanced engineering plastics for the meter’s measuring chamber significantly reduces wear and helps maintain reliable, accurate measurement over all operating conditions. Solid particles are gathered by a large surface area strainer, further preventing damage; and its advanced design ensures that partial obstruction of the strainer will have no ill effect on the accuracy of the meter’s registration. A body ‘O’ ring seal between the measuring chamber and meter body ensures that internal leaks which could by-pass the measuring chamber are eliminated.

• The counter is fully sealed, liquid filled using a vacuum and offers simple, straight-reading presentation. The number rollers are completely immersed in a lubricating non-toxic liquid, and a sac attached to the counter casing acts as a balancing membrane, ensuring the pressure of the liquid in the counter equals that of the external water. The counter window is inside the meter body in the direction of flow for simplified reading.

• The V100 offers unrivalled resistance to illegal tampering: its unique conical body-half design eliminates the risk of disassembly whilst in service and the mechanically driven cyclometer-type counter is resistant to magnetic interference. An optional return reverse flow restrictor provides further protection against outside interference, preventing the meter being operated in the reverse direction to reduce the reading. This restrictor cannot be removed without opening the meter and destroying the seal.

• Meter stoppages are substantially reduced, durability enhanced and performance improved as a result of a uniquely-designed grooved piston within the meter measuring chamber, increasing applications flexibility (available in 15mm and 20mm sizes). 

• Valuable management information can be obtained with the aid of a probe pulse unit, available on V100 meters. The unit provides important consumption and flow information on a temporary or permanent basis, allowing examination and analysis of consumption patterns and providing a valuable early detection of leaks. Volt-free probe pulsers provide output signals for interrogation by externallypowered reading devices and can be attached to previously installed V100 meters with the facility to install a probe pulse unit, at any time without interrupting the water supply.

Product Details:

Product Detail :- The V110 volumetric meter has a co-polymer resin manufactured body which allows its use with absolute confidence where water with aggressive or dezincification properties exist. Available in sizes 15mm, 20mm and 25mm with flow rates of between 15l/h and 7m³/h.

Register

• The register is fully-sealed, vacuum filled, with a simple straight-reading presentation. The number rollers are totally immersed in a non-toxic liquid which acts as a lubricant. The sac attached to the register casing acts as a balancing membrane and ensures the pressure of the liquid in the register is the same as that of the water inside the meter. The register is placed in a window inside the meter body in the direction of flow for easy reading.

Tamperproof

• The V110 offers outstanding resistance to illegal tampering. Its unique conical body-half design means it cannot be disassembled while in service and the mechanical-driven register cannot be interfered with magnetically. An individual serial number is heat printed on each body.

Optional features

• An internal disc-type reverse flow restrictor can be included as an optional feature. This reduces the possibility of water being run back illegally.

Remote Reading

• The V110 operates as a standard meter until the need arises and then by simply removing a plastic plug and inserting a magneticallyoperated signal sensor, it can be converted for remote read. It can be converted on location whilst still in use without any disconnection, risk of component damage or need to re-calibrate. The pulse provided by the probe can be used to step a remote register or in the longer term, the output can also be interfaced with a module which could be interrogated by a computer or other device. The V110 model is particularly suitable for incorporation in energy management systems.

Key Features And Benefits

• Volumetric rotary-piston principle of measurement ensures registration even at the very lowest rates of flow with maintained accuracy over the flow range. 
• Unique grooved piston design (15mm to 20mm).
• Can be installed in horizontal, vertical or inclined pipelines without affecting accuracy. 
• The co-polymer resin manufactured body allows its use with absolute confidence where waters with aggressive or dezincification properties exist. 
• Requires no calibrations throughout its lifespan. 
• ‘O’ ring seal placed between the measuring chamber and meter body ensures that internal leaks which could by-pass the measuring chamber are eliminated.
• Use of advanced engineered plastics for the measuring chamber minimises wear and maintains reliability under all operating conditions.
• Large surface area fine filter prevents damage by gathering particles. Due to its design, a partially obstructed filter will not affect the

• Care should be taken during installation to ensure that the meter and its connectors are not subjected to elongation, compression or bending forces. Allowance should be made for the expected expansion and contraction of adjacent pipework. High installation stresses may eventually give rise to joint leakage or even permanent damage to the meter or its connections.

• All Elster meters are manufactured from the highest quality materials ensuring maximum resistance to wear and corrosion and are UK WRc approved.

Product Details:

• Simple link to radio technology
• Approval to European Directive 2004/22/EC
• Detection of extremely low flows 
• Precision calibrated assembly method 
• Maximised revenue collection by innovative design 
• Volumetric design permits optimum performance in horizontal, vertical or inclined pipelines 
• Proven grooved piston for excellent durability and reduced blockages 
• Hermetically sealed copper can register with glass lens, providing conformity to IP68

• The easy-to-read, hermetically sealed copper can register has a 10-year proven track record. Tamper-proof registers are sealed to eliminate condensation and waterproofing, and offer conformity to IP68.

• As the demand for remote metering increases, the V200/V210 offers a range of communication options for every utility company. Incorporating an inductive pulse target which can be read by a tamper-proof, bi-directional inductive pulse transmitter, the V200/V210 is easily integrated into a remote reading system by simply adding the relevant module. The bi-directional inductive pulser monitors the flow of water and is self-powered for years of reliable use.

• V200 and V210 meters are designed to give long, trouble-free working life, with excellent features such as the proven grooved piston design. The action of this piston creates flow eddies in the grooves which hold solids in suspension until flushed out, reducing the possibility of meter stoppages. The V200/V210 meters offers low headloss reducing network leakage operational costs. It’s volumetric design permits optimum performance in horizontal, vertical or inclined pipelines

Product Details:

Product Details:

Additional Information:

• Delivery Time: Ready

Product Details:

Additional Information:

• Delivery Time: ready

Product Details:

Additional Information:

• Delivery Time: Ready

Product Details:

Product Details:

Additional Information:

• Item Code: 9028
• Delivery Time: ready
• Packaging Details: box packed

Product Details:

Additional Information:

• Delivery Time: Ready
• Packaging Details: Cardboard Box

Product Details:

Additional Information:

• Production Capacity: 25000
• Delivery Time: Ready
• Packaging Details: Cardboard Box

Product Details:

Product Details:

Product Details:

• Woltmann meters, iso 4060 Class A accuracy
• Hot water 130C and 16 Bar max
• Cast Iron epoxy coated, inline meters, pulse output as standard
• Horizontal and Vertical installation

• MID class 2 & 3
• Hermetically sealed dry dial register
• Leak-proof construction
• Tamper proof
• Factory fitted pulse output facility
• Serial pulse output.
• Complies with all relevant international standards.
• Measurement of hot water to a maximum temperature of 120 c.
• Robust shroud and register for long life and rædability.
• Highly durable tungsten carbide sapphire jewel rotor bearings.

Product Details:

Product Detail :- iPERL® (International) are next-generation, high-performance, solid-state smart water meters with integrated bi-directional communications capability. iPERL meters use a unique technology that provides unrivalled, sustained accuracy over their expected 15-year operational life.

With a low-flow measurement of 1 litre per hour, iPERL helps utilities to reduce non-revenue water. They can be programmed to provide highly granular data at 15-minute intervals, which improves accuracy in identifying customer-side leaks. The wealth of data also helps water utilities to manage distribution networks more efficiently, to conserve water, to provide accurate billing to customers and to inform them about leaks, fraud or unusual usage patterns.

• Improves operational efficiency and customer service
• Reduces non-revenue water, measuring flow rates as low as 1 litre per hour
• Helps reduce maintenance and cost
• Installs horizontally, vertically or diagonally
• Prevents free water removal and tampering attempts
• Detects system leaks
• Allows remote monitoring and diagnosis
• Collects and logs consumption data
• Helps to preserve energy and to optimize power
• Provides seamless, scalable bi-directional communications for technology migration from Automatic Meter Reading (AMR) to Advanced Metering Infrastructure (AMI)

• High measurement accuracy offering R800 metrology through all meter sizes (DN15 to DN40)
• Up to 15-year expected operational life depending on communication frequency
• High sampling rate with low battery consumption
• Integrated bi-directional communication for AMR and AMI
• Two low-power, public-spectrum radio systems
• OMS certified
• Data logger with up to 2880 parameters
• Alarm functions
• Tamperproof and fraud resistant
• No moving parts
• Zero-lead construction

• EU Design-examination Certificate in conformity with:
  • 2014/32/EU (MID)
  • 2014/53/EU (MID)
  • EN 14154-4:2014
  • ISO 4064:2017
  • OIML R49:2013
• Drinking water approvals:
  • ACS (F)
  • KIWA (NL)
  • KTW/DVGW (D)
  • WRAS (UK)

For more information about this product, please download the data sheet.

Product Details:

Product Details:

Product Details:

Product Details:

Product Detail :

• Inferential Type Dry Dial Mechanical Driven, Non Magnetic Drive.
• Straight Reading Cyclometer Type, 7-inline consequetive Digits with one central pointer for easy reading.
• Innovative Design with Wiper for Clear Reading.
• Wide Range of Products 15mm to 50mm.
• Applications: Domestic, Agriculture, Industrial.
• ISI Marked Class - A Multi Jet
• (IS 779:1994) 

Product Details:

• Multi-jet wet-dial meter for cold water  Nominal size Q3 2.5 to 25 m3/h
• Ultra-reliable interface for communication modules
• EC type examination certification (MID) up to R160H/R80V
• conText® marking system

Product Details:

• The meter is capable of high flows for a short period of time. The meter is manufactured from the highest quality materials for maximum resistance to wear and corrosion. One example of this, is the jewelled rotor bearings which are used to provide flow sensitivity and long life. All Elster meters have a mesh filter for aditional protection against debris. 

• The register is super dry and guarantees excellent security through a snap-fit locking system. The register has 360º rotation, ensuring easy readability. A copper can register with glass lens is also available. 
• Valuable management information can be obtained via a pulse unit available on the plastic register version.

• Snap-fit locking register and shroud system;
• Anti-fraud ring that will prevent the meter being opened after installation; 
• Reliable anti-fraud indication system, which allows tampering to be detected. 

• Multi-Jet meter Class “B”, Magnetic transmission;
• INMETRO Approval (Brazil Version); 
• PTB Approval; 
• Excellent wear resistance and good performance at low flow rates; 
• Performance at or above the required NBR NM 212 and ISO 4064;
• Register super dry IP68; 
• Register versions: Copper+Glass, Plastic.

Product Details:

• Wide measuring range approved up to 2000:1
• Retro-fit mechanism into the H4000 body 
• Uses innovative measuring technology 
• Electronic register includes an integrated communications cable 
• Electronic register pre-equipped for AMR/AMI with pulse, encoder, Aquabus, M - Bus, L - Bus outputs 
• Value adding AMR/AMI style features such as flow rate display, data-logging, leak detection, tamper alarms and tariffing 
• Approved to the latest European Directive 2014/32/EU

• H5000 is the next generation of Woltmann (turbine) bulk water meter. With a range of important features, H5000 represents the very highest performance in bulk flow water metering making it ideally suited to both billing and water distribution applications. Available in seven sizes from DN40 to DN150 for flow rates between 40 I/h and 200 m3/h, the H5000 operates at temperatures up to 50°C and a maximum working pressure of 16 bar.
• The H5000 meter has an advanced electronic register which includes integrated communications covering a range of industry standard outputs compatible with common AMR/AMI systems and data-logging equipment.

• H5000 has the widest measuring range of any metering technology with a single measuring element. With low-flow that almost matches combination meters, H5000 provides a metrological performance that ensures nearly every drop is measured. With an unrivalled measuring range up to 2000:1 this also simplifies meter selection and reduces inventory.

• H5000 uses the same body as the industry leading H4000 Woltmann meter, providing simple, cost effective change-out of existing meter stocks. For new meters, the H5000 is available in both ISO (WP) and DIN (WS) lengths. The meter can also be installed in any orientation without any loss of metering accuracy

• H5000 features an all-new rotor design combined with long-proven sensor technology to maximise the measuring range. Just a single moving part improves sensitivity, durability and maintains longevity even at the highest flow rates.

• H5000’s electronic register includes an integrated communications cable (no need to purchase separate modules) with a range of industry standard outputs compatible with common AMR/AMI systems and data-logging equipment. H5000’s electronic register is self powered by internal batteries with a typical lifetime of 15 years*. The large, clear display provides valuable additional information to support a range of activities.

Product Details:

Product Details:

• Hermetically sealed register (IP 68) Patented hydrodynamically balanced rotor (≤DN 300) Patented symmetrical calibration adjustment (≤DN 300) Register may be rotated through 360° High overload capability Pattern approved removable measuring element Powder coating affords max. corrosion protection Not affected by external magnetic fields   WP-Dynamic Hybrid Electronic Encoder Register display KL Australian Standard lengths Range exceeds Australian Standard AS3651.1 measurement class 2 requirements Test certicicates provided

• Measurement of high, relatively constant flow rates, e.g. behind pumps

• Up to 3 pulsers (1 x OD, 2 x RD) may be fitted without breaking the approval seal 1/4” connection port for pressure sensors May be equipped with 3 different electronic registers

• Unrestricted straight pipe in front of the meter 3 x DN (DN400 5 x DN) No abrupt restrictions directly behind the meter

Product Details:

• Magnetic Transmission, Dry type register.
• Compact design & Light weight.
• Register can be rotated in any resistant, keeps clear reading for long time.
• Only one moving part - the impeller - in contact with the water for minimum wear & utmost reliability.
• Straight Reading Cyclometer type register for the most comfortable reading position of 7 rollers & 2 pointers.

Product Details:

• Cost Effective - High Performance.
• Magnetic Transmission, Dry Type Register.
• Register can be Rotated in any direction for convenient reading.
• Only one moving Part - the impeller - in contact with the water for minimum wear & utmost reliability.

Product Details:

Description:- 

• Inferential Type Dry Dial Mechanical Driven.
• Circular Multipointer Pattern type register with all pointers reading clockwise.
• Innovative Design with wiper for clear Reading.
• All the material i contact with Hot water, consciously selected by the known resistance to corrosion.
• Suitable for HOT WATER with maximum temperature 90 degree.Wide Range of products 15m to 50mm.

Product Details:

Product Details:

MeiStream® is an industrial meter for:

• Measurement for billing of cold potable water up to 50 °C
• Measurement of high flow rates (e.g., in pumped pipes)
• Measurement of low flow (e.g., in light load periods)
• Leakage control
• Sizes from DN 40 up to DN 300

• High overload capability
• No straight inlet length necessary (U0D0 acc. to OIML R49 and EN 14154)
• Installs in horizontal and vertical positions
• Can be submerged; protection class IP68
• Materials are temperature resistant up to 70 °C
• Use of optical pulsers type OD are still possible

• Meter with MID pattern approval acc. to annex MI001
• Exchangeable metrological unit with MID pattern approval acc. to annex MI001
• Meter body in short (WP) and long (WS) overall length acc. to DIN 19625 and EN 14154 available
• Register prepared for HRI-Mei pick-up
• Encoder register with different data protocols (M-Bus, MiniBus, Sensus, IEC 1107)
• Version free of copper alloy for aggressive water
• Version for high pressure up to PN 40
• Version for use in hazardous area
• HRI-Mei factory mounted
• ¼” pressure monitoring port

For more information about this product, please download the data sheet.

Product Details: