Energy Meter Suppliers in Delhi

Product Details:

Product Detail :- The PolluWatt™ Duo II thermal  energy meter and totaliser successfully combines a high-performance energy meter and three integrated, freely programmable analogue outputs (0/4 – 20 mA) in one housing.

Use the PolluWatt Duo II  to complete the heat measuring point with almost all the usual volume measuring units and temperature sensors that are currently used in the field.

Depending on the type and size of the volume measuring unit foreseen, the valence of the incoming volume signal is programmed at the factory before delivery. For measuring points in which the volume measuring unit is built into the heating, PolluWatt Duo II can be acquired as a supply calibrated variant.

For cooling devices there is a variant with national cooling meter approval according to K7.2.

The PolluWatt Duo II is used for energy metering in split systems which are equipped with passive pulsed flow meters and 2-wire or 4-wire Pt500 temperature sensors. In most cases PolluWatt Duo II is used with the following flow sensors:

Benefits to you

• Shows all measurements and information in clear text on a backlit, two-line dot matrix display
• Operates via two user friendly buttons on the front side of the device
• Allows the setting of parameters directly on-site without additional peripheral devices

Features

• In order to guarantee connection to current systems for the long-distance transmission of measurement data, PolluWatt Duo II possesses the following outputs and data interfaces:

•  
  • Three analogue freely programmable passive current outputs (0/4 – 20mA); an external supply is needed for operation
  • Two outputs for heat quantity and volume signals with programmable signal valence and closure time
  • M-Bus interface in accordance with EN 1434 with variable data structure
  • Optical interface
  • Alarm relay output

• A large number of special functions allows comprehensive evaluations and checks
• Cutoff date programming enables the collation of 12 intermediate values of the heat quantities during a year
• Minimum-maximum control over a longer period of time can be carried out by means of extreme value recording.
  • Recording of operational hours
  • Register’s quantity and duration of faulty states
  • Register’s date of calibration
  • Register’s date of re-calibration
  • Record number and duration of alarm states

Specifications

PolluWatt Duo II is ideally equipped for use in demanding metering tasks, thanks to:

• The use for temperature-measuring purposes of a high-resolution AD converter (20 bit) designed with long-term stability in mind and equipped with self-calibration and filter functions
• Short counter-cycle (mains version: 1 s)
• The ability to use high-resolution mechanical or electronic flow indicators operating at pulse frequencies of up to 200 Hz (mains version)

For more information on this product, please download the data sheet.

Product Details:

Product Detail :- The compact PolluStat ultrasonic meter measures energy consumption in heating or cooling circuits. Thanks to its high-precision flow sensor, the application range stretches from district heating stations to consumption billing for individual apartments. It is equipped with a large comprehensive LCD with programmable screens.

The following modules for remote readout and data communication are available as options and can be retrofitted:

• Wireless M-Bus
• M-Bus per EN 1434-3 with arbitrary readout frequency, the values update every 2 min.
• Wireless M-Bus and 3 pulse inputs for consumption meters with remote meter pulse output
• M-Bus per EN 1434-3 and 3 pulse inputs for consumption meters with remote meter pulse output
• Single and double Pulse output
• Modbus (Q1/2021) IEC 61158

Benefits to you

• With a detachable calculator unit for installation sites with limited space with approx. 0.85 m connection cable
• Storage of flow rate, power and temperature, as well as the respective maximum values of the last 15 months via radio, additional 15 half-monthly values via the display
• Modular on-site equipable solution for different communication interfaces offers more flexibility and lower storage costs
• Standard installation in the “lower temperature pipe” (aka outlet) can be changed to “higher temperature pipe” (aka inlet pipe) installation if necessary on-site, as long as the energy consumption measurement total is below <10kWh
• Separate 230V or 24V mains power supply module available

Features

• MID approval in class 2 per EN 1434 for arbitrary installation (also overhead)
• Optical data interface (M-Bus protocol) as standard
• Tariff registry: 2 individually customizable registers
• Freely selectable annual cut-off date
• 15 monthly values via radio
• 15 monthly and 15 half-monthly values via the display
• 24 monthly and semi- monthly values via optical interface or M-Bus

PT1000 temperature sensor:

• Length 45 mm / diameter 5.2 mm, cable length 1.5 m
• Length 50 mm with locking sleeves at 85 and 100 mm / diameter 6.0 mm, cable length 3 m

Specifications

For electronic remote reading of the meters and connection to building automation systems, a series of optional modules are available for the PolluStat series, which can be installed in the factory or retrofitted at any time:

• Wireless M-Bus (radio)
  A wireless M-Bus interface for walk-by and stationary readout in accordance with Open Metering Standard (OMS). 868 MHz frequency with the freely selectable modes S1, T1 and C1. Encryption modes 5 and 7 can also be selected per OMS 4.0.2.
• M-Bus
  For cable-connected data readout via a 2-wire cable with reverse polarity protection per EN13757. Suitable for monitoring, building automation, or connection to an existing M-Bus network. Unlimited number of readouts. (Data update rate 120 s, with external power supply operation 2 s.)
• Remote meter pulse
  Potential-free pulse output for connection to various interrogation devices.
• Wireless M-Bus (radio) with three inputs for external consumption meters
  This option allows the connection of up to three external consumption meters, e.g. an electricity meter, a cold and a hot water meter. Reed contact or open collector pulse can be connected. The pulse value can be adjusted with the optical head and by suitable software.

Product Details:

Overview:- The new PolluCom F is Sensus’ next generation mechanical thermal energy meter following the successful PolluCom E with multiple new features.

A major new feature is that the PolluCom F is now equipped with wireless communication to integrate the energy measurement into your heating network solution.

Besides the data communication, the PolluCom F gives you reliability of the measurements with a technology, which is more than 45 years approved.

Benefits to you

• Optional communications easy to be integrated to different reading and billing programs
• Battery lifetime up to 13 years
• Big size storage of the historical data
• Ideally applicable for “6/12 °C cooling systems” due to temperature range of the flow sensor from 5 to 90 °C
• Updates measuring values quickly (4 seconds for temperatures, 4 seconds for energy and flow rate)
• Password-protected parameter selections on the meter itself; no additional peripheral equipment needed
• Optional, factory-fitted modules for electronic meter reading and connection with building automation systems
• Can be used with water glycol mixtures due to mechanical measuring principle
• Provides a pre-settable correction factor for enthalpy for usage in water glycol systems

Product Features

• Available wireless M-Bus communication OMS T1 and C1, compatible with Sensus Diavaso and other OMS wireless M-Bus certified systems
• New user friendly enclosure design
• Configurable and high speed data telegram for M-Bus data transmission
• Integrated data logger
• Optionally available with removable integrator for narrow installation sites: PolluCom F/S with approximately 5 m connection cable
• Standard optical interface
• Tariff function for flexible heat & cooling consumption calculations (e.g., dependence on heat & cooling power or return flow temperature)
• The integrator is equipped with an easy-to-read LCD showing eight figures in the main reading line and six figures in the subordinate reading line. Twelve additional characters support the reading
• Option of entering M-Bus secondary address and customer number directly into meter unit without any other device
• Approval in class 2 according to EN 1434, measuring range (minimum to nominal flow) of 1:100 in horizontal and vertical fitting position
• Regarding meter remote reading and data communication the following modules are available:Wireless M-Bus according to EN 13757-4 and OMS 4.0.2 certified
• M-Bus according to EN 1434-3 with two inputs for consumption meters with remote reading pulse output
• Integrated data logger
• Potential- and bounce-free remote reading pulses (1 kWh per pulse)

Diavaso is a suite of apps for remote meter reading using smartphones or tablets. The Diavaso app suite consists of 5 individual apps; SensusRF Finder, Collection Station, Collection Mobile, Configuration & Service, and Data Logger. These apps can be used individually or in combination, depending on your requirements for remote meter reading (AMR) or small scale fixed network (AMI). The mobile applications run on an AndroidTM device and communicate with the meter via the SensusRF radio transceiver SIRT (Sensus Interface Radio Tool). The Diavaso apps are compatible with all SensusRF enabled meters and repeaters.

The Diavaso apps are designed to be used for meter installation, remote reading, maintenance and configuration of meters and repeaters. The Collection Mobile also includes a server based interface (web portal) for managing the meter reading workflow, reporting as well as data exchange with the billing system. See datasheet (LS7000) for detailed information.

Product Details:

Description:- The PolluTherm® integrator measures energy consumption in heating or cooling circuits. PolluTherm can also be used in combined heating and cooling systems where an automatic switch-over point stores heating and cooling energy in separate registers. This switch-over point can be changed in accordance with the heating and cooling system requirements even after the meter has already been installed (e.g., concrete core activation).
The novel casing concept of the PolluTherm offers two slots for upgrade with various modules (e.g., M-Bus or remote reading pulses) at any time for data communication and remote reading.

Benefits to you

• Simplifies stock-keeping;  input pulse values can also be programmed on-site (order variant without surcharge)
• Connects temperature sensors Pt 500 in four-wire technology for quick and economic extension of temperature sensor cable (standard)